Distractions
Moderators: suzukigoof, b00geyman, novocaine, jaz66, rodge, badanimal
- mike-rf600r
- Exhaust Technician
- Posts: 8308
- Joined: Tue Jan 14, 2014 12:58 pm
- Location: Attleborough, Norfolk
Re: Distractions
Happy days. Just what you want. Nice chuck of change for you to reinvest and put some under The mattress no doubt. Well done sir.
Ride it like you stole it! - Bikes are for life, not just sunny days....
-
- Moderator
- Posts: 9674
- Joined: Mon Apr 27, 2009 6:20 pm
- Location: warr-ing-ton
Re: Distractions
Keeping slims thread alive while hes unable to.......
His and hers, and yes i'm thinking about picking up a bit steel to grind my own (i wish i was allowed a forge to make noise with)
His and hers, and yes i'm thinking about picking up a bit steel to grind my own (i wish i was allowed a forge to make noise with)
jaz66 wrote:Carbon fibre....It's just corduroy for vehicles....)
- marmike
- Posts: 2217
- Joined: Mon Nov 02, 2009 7:52 pm
- Location: Notts
Re: Distractions
novocaine wrote:Keeping slims thread alive while hes unable to.......
His and hers, and yes i'm thinking about picking up a bit steel to grind my own (i wish i was allowed a forge to make noise with)
great! they even stick to the wall like in those old baronial halls.
minority of 1. not statistically visible. copyright.
-
- Posts: 1779
- Joined: Tue Jun 06, 2017 6:15 pm
- Location: midlands
Re: Distractions
I quite like the swords, nice bit of work sir!
You are right novo I haven't been able to do much until yesterday, previous to that I could pull the trigger on the mig just enough to get the gas on but couldn't pull it enough to get the wire spooling
In the mean time as soon as I could drive I went collecting bits then cleaned it down as well as I could & also sorted them out into piles so I could have a weld fest as soon as I could, not quite there yet but I did manage to tack a couple of clocks together yesterday & cut some timber for tops today![Thumb Up Left :handgestures-thumbupleft:](./images/smilies/handgestures/thumbupleft.gif)
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
You are right novo I haven't been able to do much until yesterday, previous to that I could pull the trigger on the mig just enough to get the gas on but couldn't pull it enough to get the wire spooling
In the mean time as soon as I could drive I went collecting bits then cleaned it down as well as I could & also sorted them out into piles so I could have a weld fest as soon as I could, not quite there yet but I did manage to tack a couple of clocks together yesterday & cut some timber for tops today
![Thumb Up Left :handgestures-thumbupleft:](./images/smilies/handgestures/thumbupleft.gif)
never surrender !
-
- Moderator
- Posts: 9674
- Joined: Mon Apr 27, 2009 6:20 pm
- Location: warr-ing-ton
Re: Distractions
good to hear you're on the mend. Want to borrow the SMAW, no trigger to pull.
![Rolling On The Floor Laughing :laughing-rolling:](./images/smilies/laughing/rolling.gif)
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
![Rolling On The Floor Laughing :laughing-rolling:](./images/smilies/laughing/rolling.gif)
jaz66 wrote:Carbon fibre....It's just corduroy for vehicles....)
-
- Posts: 1779
- Joined: Tue Jun 06, 2017 6:15 pm
- Location: midlands
Re: Distractions
Thanks novo I'm getting there slowly
I was stick welding for 10+ years before I touched a mig & still have one here, to be honest I'm much better with a stick welder than a mig on reasonable thickness steel, just got bored with cleaning the slag up all the time![Rolling On The Floor Laughing :laughing-rolling:](./images/smilies/laughing/rolling.gif)
![Thumb Up Left :handgestures-thumbupleft:](./images/smilies/handgestures/thumbupleft.gif)
I was stick welding for 10+ years before I touched a mig & still have one here, to be honest I'm much better with a stick welder than a mig on reasonable thickness steel, just got bored with cleaning the slag up all the time
![Rolling On The Floor Laughing :laughing-rolling:](./images/smilies/laughing/rolling.gif)
never surrender !
-
- Posts: 1779
- Joined: Tue Jun 06, 2017 6:15 pm
- Location: midlands
Re: Distractions
After a couple of days of being able to weld to a reasonable standard again .............
![Image](https://i.postimg.cc/hPKLFRZx/121.jpg)
![Image](https://i.postimg.cc/50Zs5Kfg/112.jpg)
![Image](https://i.postimg.cc/VvQF0SFH/114.jpg)
Current stock that my contact is coming to look at & hopefully buy some of tomorrow
![Image](https://i.postimg.cc/5tX5P57R/111.jpg)
![Image](https://i.postimg.cc/hPKLFRZx/121.jpg)
![Image](https://i.postimg.cc/50Zs5Kfg/112.jpg)
![Image](https://i.postimg.cc/VvQF0SFH/114.jpg)
Current stock that my contact is coming to look at & hopefully buy some of tomorrow
![Very Happy :D](./images/smilies/icon/biggrin.gif)
![Image](https://i.postimg.cc/5tX5P57R/111.jpg)
never surrender !
-
- Posts: 1779
- Joined: Tue Jun 06, 2017 6:15 pm
- Location: midlands
Re: Distractions
All gone
Now I need to get on with finding some more bits to make some more![Rolling Eyes :roll:](./images/smilies/icon/rolleyes.gif)
![Very Happy :D](./images/smilies/icon/biggrin.gif)
Now I need to get on with finding some more bits to make some more
![Rolling Eyes :roll:](./images/smilies/icon/rolleyes.gif)
never surrender !
- jaz66
- Moderator
- Posts: 12889
- Joined: Tue Apr 28, 2009 11:01 pm
- Location: Costa del London
-
- Posts: 1779
- Joined: Tue Jun 06, 2017 6:15 pm
- Location: midlands
Re: Distractions
Well I used up the last of my bits & this is the result
![Image](https://i.postimg.cc/W1X1G7xH/PICT0001.jpg)
![Image](https://i.postimg.cc/3JjRRh17/PICT0002.jpg)
I'm not sure the trader will be getting this one as I really like it & have discovered what he's attempting to sell some of my stuff for
lets just say I'm shocked at what he thinks its worth
don't get me wrong some of the stuff he's had he's trying to knock out at a small profit which is fair enough but bigger pieces
I see I'm going to have to be careful with this bloke, I'm not completely daft though my prices to him just went up
A few people have said try to get into one of the London streampunk type shops & make some decent money off this stuff but I don't know what I'm looking for or where to start with that![Question :?:](./images/smilies/icon/question.gif)
![Exclamation :!:](./images/smilies/icon/exclaim.gif)
![Image](https://i.postimg.cc/W1X1G7xH/PICT0001.jpg)
![Image](https://i.postimg.cc/3JjRRh17/PICT0002.jpg)
I'm not sure the trader will be getting this one as I really like it & have discovered what he's attempting to sell some of my stuff for
![Confused :?](./images/smilies/icon/confused.gif)
lets just say I'm shocked at what he thinks its worth
![Surprised :o](./images/smilies/icon/surprised.gif)
![Surprised :o](./images/smilies/icon/surprised.gif)
![Laughing :lol:](./images/smilies/icon/lol.gif)
A few people have said try to get into one of the London streampunk type shops & make some decent money off this stuff but I don't know what I'm looking for or where to start with that
![Question :?:](./images/smilies/icon/question.gif)
never surrender !
- mike-rf600r
- Exhaust Technician
- Posts: 8308
- Joined: Tue Jan 14, 2014 12:58 pm
- Location: Attleborough, Norfolk
Re: Distractions
if your making a decent profit don’t worry too much what he may get for bigger stuff. He has to store it and sell it. Don’t get greedy. Quick turn around is what you want.
People get offended at time when I buy a exhaust and they see it for sale elsewhere at a lot more.
Me knowing how to list, what it’s worth cleaning it up well enough etc and being willing to wait at times for a decent price.
You said didn’t want it to be a business as such. Reevaluate your prices sure but don’t price yourself up too much so you loose quick turn around deals. I find it a hard balance myself on my small time exhaust sales. I alwAys want to move on to next deal soon as I get something lol.
People get offended at time when I buy a exhaust and they see it for sale elsewhere at a lot more.
Me knowing how to list, what it’s worth cleaning it up well enough etc and being willing to wait at times for a decent price.
You said didn’t want it to be a business as such. Reevaluate your prices sure but don’t price yourself up too much so you loose quick turn around deals. I find it a hard balance myself on my small time exhaust sales. I alwAys want to move on to next deal soon as I get something lol.
Ride it like you stole it! - Bikes are for life, not just sunny days....
-
- Posts: 1779
- Joined: Tue Jun 06, 2017 6:15 pm
- Location: midlands
Re: Distractions
I am with you on that Mike a quick turn around is always good for me & I don't really care what he makes as such but I'm surprised at what he's asking for some of it
Lets put it another way a 30% or even 50% mark up is fine & to be expected but a 200% mark up isn't, my own fault for selling it too cheap I know but it still rankles & it wont be happening again
He did say something along the lines of "its market forces, supply & demand" or some such banality but didn't seem to like it much when I mentioned he would be stuffed if he had the demand & I refused to supply at the prices![Rolling On The Floor Laughing :laughing-rolling:](./images/smilies/laughing/rolling.gif)
Lets put it another way a 30% or even 50% mark up is fine & to be expected but a 200% mark up isn't, my own fault for selling it too cheap I know but it still rankles & it wont be happening again
![Wink ;)](./images/smilies/icon/wink.gif)
He did say something along the lines of "its market forces, supply & demand" or some such banality but didn't seem to like it much when I mentioned he would be stuffed if he had the demand & I refused to supply at the prices
![Rolling On The Floor Laughing :laughing-rolling:](./images/smilies/laughing/rolling.gif)
never surrender !
- mike-rf600r
- Exhaust Technician
- Posts: 8308
- Joined: Tue Jan 14, 2014 12:58 pm
- Location: Attleborough, Norfolk
Re: Distractions
I did try tell you about your prices
I do understand what you saying. Perspnaly I try work on atleast doubling my money on everything I buy. Obviously I aim for more but some deals won’t allow that. If I can get a quick ££ then on to next Ekth smaller outlays I happier than having too much in one item unfortunately I’m stuck in the latter atm. Haha.![Rolling Eyes :roll:](./images/smilies/icon/rolleyes.gif)
![Laughing :lol:](./images/smilies/icon/lol.gif)
I do understand what you saying. Perspnaly I try work on atleast doubling my money on everything I buy. Obviously I aim for more but some deals won’t allow that. If I can get a quick ££ then on to next Ekth smaller outlays I happier than having too much in one item unfortunately I’m stuck in the latter atm. Haha.
![Rolling Eyes :roll:](./images/smilies/icon/rolleyes.gif)
Ride it like you stole it! - Bikes are for life, not just sunny days....
-
- Posts: 1779
- Joined: Tue Jun 06, 2017 6:15 pm
- Location: midlands
- b00geyman
- Moderator
- Posts: 2129
- Joined: Wed May 04, 2011 4:26 pm
- Location: Just round the corner from Knockhill
Re: Distractions
You sir are a creative genius, love the clock. I take it the copper pipework is a wee lamp, which I would spend hours polishing, as I did as a kid, brass, copper whatever was in the house I polished. Keep meaning to get an old timing cover from a brit bike and polish it up to hang on the wall, one day maybe.
Great seeing your stuff, you have a talent mate,
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
Great seeing your stuff, you have a talent mate,
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
Toto, I've a feeling we're not in Kansas anymore.
-
- Posts: 1779
- Joined: Tue Jun 06, 2017 6:15 pm
- Location: midlands
Re: Distractions
Thanks mate, yes the copper thing is a lamp I knocked up when I had run out of engine parts, it was polished & then lacquered so didn't have to be done again
Similar to you, as a kid our house was full of brass & copper things, we even had a copper topped coffee table I used to have to polish, I hated that bloody thing & used to get twitchy every time someone went near it, probably accounts for my aversion to polishing now![Rolling On The Floor Laughing :laughing-rolling:](./images/smilies/laughing/rolling.gif)
Similar to you, as a kid our house was full of brass & copper things, we even had a copper topped coffee table I used to have to polish, I hated that bloody thing & used to get twitchy every time someone went near it, probably accounts for my aversion to polishing now
![Rolling On The Floor Laughing :laughing-rolling:](./images/smilies/laughing/rolling.gif)
never surrender !
- badanimal
- The Gatekeeper
- Posts: 7188
- Joined: Thu Jul 07, 2016 9:32 pm
- Location: Wild Windy Welsh Mountains
Re: Distractions
Have you got an Ebay shop ? or a website ?
IN THE END YOUR LIFE WILL FLASH BEFORE YOUR EYES... MAKE SURE IT'S WORTH WATCHING
-
- Posts: 1779
- Joined: Tue Jun 06, 2017 6:15 pm
- Location: midlands
Re: Distractions
A mate of mine was going to build me a posh website but that hasn't happened yet, I know I could do it myself but thought it might be better if he did it as that's his jobbadanimal wrote:Have you got an Ebay shop ? or a website ?
I do sell on ebay but not this stuff yet & I don't have a shop, I'm a bit wary of listing it as there are plenty of folks who will just copy my ideas
Etsy is useless as there isn't a place for anything like I make & the other similar places either don't have the traffic or cost a fortune in fees
Still making a few quid at it but nowhere near what I could make if I could find a reliable outlet
never surrender !
- mickthemaverick
- Posts: 153
- Joined: Sat Apr 06, 2019 7:09 pm
- Who am i?: An aspiring boring old fart whosevery early days on Bikes were superceded by cars and rallying. Rallied quite successfully for 20 years then ran out of cash. Now tinker in garage with cars and bikes and watch loads of sport!! Like a beer too!!
- Location: Hertford, Herts
Re: Distractions
Just a thought Slim - have a look at Drew Pritchard's website and drop him an email - he has worldwide contacts and may be a reliable buyer for you - Great stuff in the pics
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
A trained RF engineer!! Unfortunately it stood for Radio Frequency!
- badanimal
- The Gatekeeper
- Posts: 7188
- Joined: Thu Jul 07, 2016 9:32 pm
- Location: Wild Windy Welsh Mountains
Re: Distractions
Yeah.. thats a problem i guess if they see pics.. The more successful the more they copyslim wrote:
I do sell on ebay but not this stuff yet & I don't have a shop, I'm a bit wary of listing it as there are plenty of folks who will just copy my ideas
My friend had a craft shop here that took in other crafters stuff for a small comission. Sadly shes stopped now..slim wrote: Still making a few quid at it but nowhere near what I could make if I could find a reliable outlet
Maybe ask if you can have a corner in a local shop ?
IN THE END YOUR LIFE WILL FLASH BEFORE YOUR EYES... MAKE SURE IT'S WORTH WATCHING
-
- Posts: 1779
- Joined: Tue Jun 06, 2017 6:15 pm
- Location: midlands
Re: Distractions
Thanks lads
I have been looking at places that might provide an outlet but there isn't anything local to me, probably the nearest places with the right sort of shops are either Stratford or Matlock Bath
I have a bit of a plan to tour round shops Stratford in the summer as they get plenty of foot traffic from tourists, bikers & general oddballs![Laughing :lol:](./images/smilies/icon/lol.gif)
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
I have been looking at places that might provide an outlet but there isn't anything local to me, probably the nearest places with the right sort of shops are either Stratford or Matlock Bath
I have a bit of a plan to tour round shops Stratford in the summer as they get plenty of foot traffic from tourists, bikers & general oddballs
![Laughing :lol:](./images/smilies/icon/lol.gif)
never surrender !
- badanimal
- The Gatekeeper
- Posts: 7188
- Joined: Thu Jul 07, 2016 9:32 pm
- Location: Wild Windy Welsh Mountains
Re: Distractions
Cant hurt to ask..
Around here they are quite open to stuff like that..
Ive seen a few shops that have given a bit of space to some outside products..
![Thumbs Up :-bd:](./images/smilies/icon/113.gif)
Around here they are quite open to stuff like that..
Ive seen a few shops that have given a bit of space to some outside products..
IN THE END YOUR LIFE WILL FLASH BEFORE YOUR EYES... MAKE SURE IT'S WORTH WATCHING